ACD GRUPPE F160 간략한 개요 - 페이지 6
{카테고리_이름} ACD GRUPPE F160에 대한 간략한 개요을 온라인으로 검색하거나 PDF를 다운로드하세요. ACD GRUPPE F160 16 페이지. Vehicle terminal
페이지 인쇄3.1.2 Switching off
To shut down the device, you may either use the software or press a customised key (default setting: ACD
key) for 5 seconds (default setting). If the device is in standby mode, this is indicated by flashing of the green
LED. The device can be switched off completely by switching the ON/OFF switch at the bottom of the device
to position "0" (Figure 4).
Detailed instructions for configuring the ON/OFF behavior can be requested from the manufacturer if
required.
Figure 4: Switching off
3.2 Connection Ports of the Device
The connections are at the rear side of the device. Each connection is described in the following section.
The interfaces will be explained in detail in the following figures 6 - 12.
10
11
Figure 5: Bottom of the Device
ATTENTION
MFT920_F160_Fusion_Summit_Brief_Overview_FCC_V1.50_en.doc
13
9
8
Unintended use of the interfaces should be avoided.
7
12
6
2/4
6 / 16