Cisco 8945 관리 매뉴얼 - 페이지 4

{카테고리_이름} Cisco 8945에 대한 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 8945 16 페이지. Unified ip standard phone
Cisco 8945에 대해서도 마찬가지입니다: 데이터시트 (5 페이지), 사용자 설명서 (42 페이지), 릴리스 정보 (16 페이지), 사용자 설명서 (24 페이지), 빠른 시작 (2 페이지), 빠른 시작 매뉴얼 (4 페이지), 사용자 설명서 (2 페이지), 빠른 시작 매뉴얼 (2 페이지), 사용자 설명서 (8 페이지), 사용자 설명서 (2 페이지), 빠른 참조 매뉴얼 (5 페이지), 빠른 참조 (2 페이지), 사용자 설명서 (2 페이지), 사용자 설명서 (3 페이지), 교육 매뉴얼 (31 페이지), 기능 설명서 (4 페이지), 한눈에 보기 (3 페이지), 참조 매뉴얼 (28 페이지), 사용자 설명서 (20 페이지), 시작하기 (29 페이지)

페이지 인쇄

Set Up Phone from Setup Menus

See

Cable Specifications

Step 5

(Optional) Connect a straight-through Ethernet cable from another network device, such as a desktop computer,

to the access port labeled Computer on the Cisco Unified IP Phone 8941 and 8945.

You can connect another network device later if you do not connect one now.

You can use either Category 3, 5, or 5e cabling for 10Mbps connections, but you must use Category 5 or 5e

for 100 or 1000 Mbps connections.

See

Cable Specifications

Step 6

Monitor the phone startup process. This step adds primary and secondary directory numbers and features that

are associated with directory numbers to the phone, and verifies that the phone is configured properly.

For more information, see

Step 7

If you are configuring the Ethernet network settings on the phone for an IP network, you can set up an IP

address for the phone either by using DHCP or by manually entering an IP address.

For more information, see

Step 8

Make calls with the phone to verify that the phone and features work correctly.

See the Cisco Unified IP Phone 8941 and 8945 User Guide for Cisco Unified Communications Manager.

Step 9

Provide information to end users about how to use their phones and how to configure their phone options.

This step ensures that users have adequate information to successfully use their Cisco Unified IP Phones.

For more information, see

Step 10 Adjust the footstand. For more information, see

Set Up Phone from Setup Menus

You can control whether a phone has access to the Settings menu or to options on this menu by using the

Settings Access field in the Cisco Unified Communications Manager Administration Phone Configuration

window. The Settings Access field accepts these values:

Enabled

Disabled

Restricted

If you cannot access an option on the Administrator Settings menu, check the Settings Access field.

Cisco Unified IP Phone 8941 and 8945 Administration Guide for Cisco Unified Communications Manager 10.0

(SCCP and SIP)

for guidelines.

Phone Startup Process, on page

Set Up Phone from Setup Menus, on page

Cisco IP Phone User

Allows access to the Settings menu.

Prevents access to the Settings menu.

Allows access to the User Preferences menu and allows volume changes to be saved. Prevents access

to other options on the Settings menu.

14.

Support.

Connect

Footstand.

Cisco Unified IP Phone Installation