Epson EB-755F 사용자 설명서 부록 - 페이지 10
{카테고리_이름} Epson EB-755F에 대한 사용자 설명서 부록을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson EB-755F 16 페이지.
Epson EB-755F에 대해서도 마찬가지입니다: 빠른 설정 (4 페이지)
페이지 인쇄
Details of Updated Projector Menus (Version 2.00)
Standby Mode and Quick Startup
The display conditions of the Standby Mode and the Quick Startup settings
are added.
Previous Operation Menu (Version 1.20)
Top menu
Sub menu
Operation
Standby Mode
Quick Startup
New Operation Menu (Version 2.00)
Top menu
Sub menu
Operation
Standby Mode
Quick Startup
Transmitter Settings
The Transmitter Settings are added.
Previous Network Menu (Version 1.20)
No setting is available.
Display condition
Setting is only displayed when A/ V
Output is set to While Projecting in the
projector's Signal I/O menu.
Display condition
Setting is only displayed in the following
cases:
• A/V Output is set to While Projecting
in the projector's Signal I/O menu.
• Auto Power On is set to Off in the
projector's Network menu.
New Network Menu (Version 2.00)
Top menu
Sub menu
Network
Transmitter
Settings
Start Pairing
Updates the network information of the wireless transmitter from your
computer using the Epson Wireless Transmitter Settings software. See the
Epson Wireless Transmitter Settings Operation Guide for details.
This setting is only displayed when the wireless LAN module is installed
and Simple AP is set to On in the projector's Network Settings menu.
Auto Power On
Set to On to turn on the projector automatically when you connect a
computer using the optional wireless presentation systems.
This setting is only displayed in the following cases:
• When A/V Output is set to While Projecting in the projector's Signal
I/O menu.
• When Quick Startup is set to Off in the projector's Operation menu.
Connection Guide Display
Set to On to automatically display the connection guide for the wireless
transmitter (Epson Wireless Presentation) instead of the Home screen
when there is no input signal when you turn on the projector. The
changed setting takes effect the next time you turn on the projector.
When you use a QR code to connect a mobile device, set to Off.
This setting is only displayed when Content Playback is set to Off in the
projector's Operation menu.
Wireless LAN Sys.
The Wireless LAN Sys. setting is added.
Items or setting values
Start Pairing
Auto Power On
Connection Guide Display
10