Ricoh 9922DP 시스템 설정 - 페이지 16
{카테고리_이름} Ricoh 9922DP에 대한 시스템 설정을 온라인으로 검색하거나 PDF를 다운로드하세요. Ricoh 9922DP 31 페이지. System settings
페이지 인쇄Copy Mode
Changing to Copy Mode
You can always make a copy when
the machine isn't printing or scanning
a fax data.
A
Press the {Copy} key.
The copy display appears on the
panel display.
Reference
For details, see the "Copy Refer-
ence".
Interrupt copying to make urgently
needed copies
You can interrupt the current copying
job or printing of a received fax to
make a copy.
Important
If the remaining memory space is
0%, the machine fails to receive fax
data. Wait until the machine com-
pletes printing a received fax, then
start making copies.
Limitation
You cannot use the following func-
tions for interrupt copying:
• Duplex
• Combine
• Sort/Staple
You cannot use the interrupt copy
function in the following cases:
• during fax immediate transmis-
sion
• while scanning an original for
memory transmission
• during interrupt copying
Note
Machine operations are different
depending "16. Print Priority" (See
P.21 "System Settings
Key Op. Tools" (See
5
tem Settings
/
") settings.
5
A
Press the {Interrupt} key.
If the machine is scanning origi-
nals, it will immediately stop the
scanning job. On the other hand, if
the machine is performing a copy
or print job, it will still continue the
job until you press the {Start}key
after pressing the {Interrupt} key.
When the current job stops, the in-
terrupt copy display appears on
the panel display.
Note
When you interrupt a copying
job, remove the previous origi-
nal.
B
Make your copies.
C
After interrupt copying is com-
pleted, remove the original and
delivered copies.
D
Press the {Interrupt} key again.
Resuming the interrupted
copying job
A Reset the previous original.
B Press the {Start} key.
The machine resumes the inter-
rupted copy run.
Copy Mode
1
4
/
") or "18.
5
P.22 "Sys-
9