Ricoh 9922DP System Settings - Page 16

Browse online or download pdf System Settings for All in One Printer Ricoh 9922DP. Ricoh 9922DP 31 pages. System settings

Print Page

Copy Mode

Changing to Copy Mode

You can always make a copy when

the machine isn't printing or scanning

a fax data.

Press the {Copy} key.

The copy display appears on the

panel display.

Reference

For details, see the "Copy Refer-

ence".

Interrupt copying to make urgently

needed copies

You can interrupt the current copying

job or printing of a received fax to

make a copy.

Important

If the remaining memory space is

0%, the machine fails to receive fax

data. Wait until the machine com-

pletes printing a received fax, then

start making copies.

Limitation

You cannot use the following func-

tions for interrupt copying:

• Duplex

• Combine

• Sort/Staple

You cannot use the interrupt copy

function in the following cases:

• during fax immediate transmis-

sion

• while scanning an original for

memory transmission

• during interrupt copying

Note

Machine operations are different

depending "16. Print Priority" (See

P.21 "System Settings

Key Op. Tools" (See

tem Settings

") settings.

Press the {Interrupt} key.

If the machine is scanning origi-

nals, it will immediately stop the

scanning job. On the other hand, if

the machine is performing a copy

or print job, it will still continue the

job until you press the {Start}key

after pressing the {Interrupt} key.

When the current job stops, the in-

terrupt copy display appears on

the panel display.

Note

When you interrupt a copying

job, remove the previous origi-

nal.

Make your copies.

After interrupt copying is com-

pleted, remove the original and

delivered copies.

Press the {Interrupt} key again.

Resuming the interrupted

copying job

A Reset the previous original.

B Press the {Start} key.

The machine resumes the inter-

rupted copy run.

Copy Mode

") or "18.

P.22 "Sys-