Ricoh 9927DP 시스템 설정 - 페이지 17

{카테고리_이름} Ricoh 9927DP에 대한 시스템 설정을 온라인으로 검색하거나 PDF를 다운로드하세요. Ricoh 9927DP 31 페이지. System settings

페이지 인쇄

Modes

Facsimile Mode

Changing to Facsimile Mode

You can always use the machine for

faxing when you are not copying.

Press the {Facsimile} key.

The fax display appears on the

panel display.

Note

The Memory Transmission/Re-

ception function is performed

automatically even when an-

other function is being used.

You need not switch the dis-

play. When data is received in

memory, the Receive File indi-

cator is lit.

Reference

For details, see the "Fax Refer-

ence".

Sending a Fax

Sending a fax while copying

Press the {Facsimile} key to switch

to the fax display.

Note

Remove any originals of your

copy job.

Complete the usual operations

for sending a fax, then press the

{Start} key.

After the transmission has fin-

ished, press the {Copy}key.

Reset the copy job originals, then

press the {Start} key.

The machine resumes the inter-

rupted copy run.

Sending a fax while printing

Press the {Facsimile} key to switch

to the fax display.

Printing is interrupted.

Complete the usual operations

for sending a fax, then press the

{Start} key.

After the transmission has fin-

ished, printing re-starts.

Printing a Received Fax

When you are not copying, a received

fax is printed automatically. You do

not need to switch to Facsimile mode.

If you wish to print a received fax

while copying, see below.

Press the {Facsimile} key to switch

to the fax display.

Copying is stopped and a received

fax is printed automatically.

Note

Machine operations are differ-

ent depending "16.Print Priori-

ty" (See

P.21 "System Settings

") or "18.Key Op. Tools" (See

P.22 "System Settings

tings.

") set-