Ricoh 9927DP Pengaturan Sistem - Halaman 17
Jelajahi secara online atau unduh pdf Pengaturan Sistem untuk Semua dalam Satu Printer Ricoh 9927DP. Ricoh 9927DP 31 halaman. System settings
Modes
Facsimile Mode
Changing to Facsimile Mode
1
You can always use the machine for
faxing when you are not copying.
A
Press the {Facsimile} key.
The fax display appears on the
panel display.
Note
The Memory Transmission/Re-
ception function is performed
automatically even when an-
other function is being used.
You need not switch the dis-
play. When data is received in
memory, the Receive File indi-
cator is lit.
Reference
For details, see the "Fax Refer-
ence".
Sending a Fax
Sending a fax while copying
A
Press the {Facsimile} key to switch
to the fax display.
Note
Remove any originals of your
copy job.
B
Complete the usual operations
for sending a fax, then press the
{Start} key.
10
C
After the transmission has fin-
ished, press the {Copy}key.
D
Reset the copy job originals, then
press the {Start} key.
The machine resumes the inter-
rupted copy run.
Sending a fax while printing
A
Press the {Facsimile} key to switch
to the fax display.
Printing is interrupted.
B
Complete the usual operations
for sending a fax, then press the
{Start} key.
After the transmission has fin-
ished, printing re-starts.
Printing a Received Fax
When you are not copying, a received
fax is printed automatically. You do
not need to switch to Facsimile mode.
If you wish to print a received fax
while copying, see below.
A
Press the {Facsimile} key to switch
to the fax display.
Copying is stopped and a received
fax is printed automatically.
Note
Machine operations are differ-
ent depending "16.Print Priori-
ty" (See
P.21 "System Settings
4
/
") or "18.Key Op. Tools" (See
5
P.22 "System Settings
tings.
5
/
") set-
5