Ricoh 9927DP Pengaturan Sistem - Halaman 16
Jelajahi secara online atau unduh pdf Pengaturan Sistem untuk Semua dalam Satu Printer Ricoh 9927DP. Ricoh 9927DP 31 halaman. System settings
Copy Mode
Changing to Copy Mode
You can always make a copy when
the machine isn't printing or scanning
a fax data.
A
Press the {Copy} key.
The copy display appears on the
panel display.
Reference
For details, see the "Copy Refer-
ence".
Interrupt copying to make urgently
needed copies
You can interrupt the current copying
job or printing of a received fax to
make a copy.
Important
If the remaining memory space is
0%, the machine fails to receive fax
data. Wait until the machine com-
pletes printing a received fax, then
start making copies.
Limitation
You cannot use the following func-
tions for interrupt copying:
• Duplex
• Combine
• Sort/Staple
You cannot use the interrupt copy
function in the following cases:
• during fax immediate transmis-
sion
• while scanning an original for
memory transmission
• during interrupt copying
Note
Machine operations are different
depending "16. Print Priority" (See
P.21 "System Settings
Key Op. Tools" (See
5
tem Settings
/
") settings.
5
A
Press the {Interrupt} key.
If the machine is scanning origi-
nals, it will immediately stop the
scanning job. On the other hand, if
the machine is performing a copy
or print job, it will still continue the
job until you press the {Start}key
after pressing the {Interrupt} key.
When the current job stops, the in-
terrupt copy display appears on
the panel display.
Note
When you interrupt a copying
job, remove the previous origi-
nal.
B
Make your copies.
C
After interrupt copying is com-
pleted, remove the original and
delivered copies.
D
Press the {Interrupt} key again.
Resuming the interrupted
copying job
A Reset the previous original.
B Press the {Start} key.
The machine resumes the inter-
rupted copy run.
Copy Mode
1
4
/
") or "18.
5
P.22 "Sys-
9