Ricoh 9927DP Системные настройки - Страница 16

Просмотреть онлайн или скачать pdf Системные настройки для Принтер "все в одном Ricoh 9927DP. Ricoh 9927DP 31 страница. System settings

Печатать страницу

Copy Mode

Changing to Copy Mode

You can always make a copy when

the machine isn't printing or scanning

a fax data.

Press the {Copy} key.

The copy display appears on the

panel display.

Reference

For details, see the "Copy Refer-

ence".

Interrupt copying to make urgently

needed copies

You can interrupt the current copying

job or printing of a received fax to

make a copy.

Important

If the remaining memory space is

0%, the machine fails to receive fax

data. Wait until the machine com-

pletes printing a received fax, then

start making copies.

Limitation

You cannot use the following func-

tions for interrupt copying:

• Duplex

• Combine

• Sort/Staple

You cannot use the interrupt copy

function in the following cases:

• during fax immediate transmis-

sion

• while scanning an original for

memory transmission

• during interrupt copying

Note

Machine operations are different

depending "16. Print Priority" (See

P.21 "System Settings

Key Op. Tools" (See

tem Settings

") settings.

Press the {Interrupt} key.

If the machine is scanning origi-

nals, it will immediately stop the

scanning job. On the other hand, if

the machine is performing a copy

or print job, it will still continue the

job until you press the {Start}key

after pressing the {Interrupt} key.

When the current job stops, the in-

terrupt copy display appears on

the panel display.

Note

When you interrupt a copying

job, remove the previous origi-

nal.

Make your copies.

After interrupt copying is com-

pleted, remove the original and

delivered copies.

Press the {Interrupt} key again.

Resuming the interrupted

copying job

A Reset the previous original.

B Press the {Start} key.

The machine resumes the inter-

rupted copy run.

Copy Mode

") or "18.

P.22 "Sys-