Cisco SPA300 Series 사용자 설명서 - 페이지 30

{카테고리_이름} Cisco SPA300 Series에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco SPA300 Series 38 페이지. Configure ring type
Cisco SPA300 Series에 대해서도 마찬가지입니다: 사용자 설명서 (12 페이지), 빠른 참조 카드 (2 페이지), 빠른 참조 카드 (2 페이지), 빠른 시작 매뉴얼 (2 페이지), 빠른 시작 매뉴얼 (3 페이지), 빠른 시작 매뉴얼 (3 페이지), 사용 설명서 (3 페이지), 매뉴얼 (2 페이지), 매뉴얼 (2 페이지), 빠른 사용 설명서 (2 페이지)

Using Your Cisco SPA302D

NOTE

STEP 1

STEP 2

STEP 3

Configuring Phone Settings

Cisco SPA302D Mobility Enhanced Cordless Handset User Guide

You can choose the outgoing line on a per-call basis by pressing and holding the

Start Call button. A list of lines that can be selected for an outgoing call appears.

Viewing the Line Status

You can view the status of all DECT Lines and the PSTN line by doing the following:

Press the center Select button to view the available preferences.

Scroll to Call Settings and press the center Select button again.

Select Line Status. The lines and status are displayed:

•

Not Ready—The SIP line is not registered.

•

Ready—The SIP line is registered.

•

In Use—The SIP line is in on a call.

•

Busy—The maximum number of calls in use for a SIP line has been reached.

To reach the Settings menu, press the center Select button, scroll to Settings,

and press the Select button again.

In the Settings menu, press the arrow buttons to select the settings you want to

change and press the Select button. You can perform the following tasks or

configure the following options from the Settings menu:

•

Handset Registration—See

SPA232D Mobility Enhanced ATA" section on page

•

Network Settings

•

SIP Settings

•

Ringtones

•

Tones

•

Backlight Settings

"Registering the Handset to the Cisco

11.