Cisco SPA302D 소유자 매뉴얼 - 페이지 30
{카테고리_이름} Cisco SPA302D에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco SPA302D 49 페이지. Mobility enhanced cordless handset
Cisco SPA302D에 대해서도 마찬가지입니다: 사용자 설명서 (38 페이지), 데이터시트 (7 페이지), 사용자 설명서 (10 페이지), 빠른 시작 매뉴얼 (2 페이지)
페이지 인쇄
To mute the Handset microphone, press the Mute button on the
Handset. The mute icon appears at the top of the Handset display.
Answering or Ignoring a Call
To answer an incoming call, do one of the following tasks:
•
Press the Start Call button.
•
Press the Left softkey to select Answer.
•
Press the Speakerphone button to answer with the speaker-
phone.
To decline to answer a call, press the Right softkey to select
•
Ignore.
Placing a Call
To place a call, do one of the following tasks:
•
Enter the number on the keypad and press the green Start
Call button.Press the Left softkey to select Answer.
•
To use the speakerphone, enter the number on the keypad
and press the Speakerphone button.
Managing Contacts:
You can store Private and Shared contacts on your Handset.
Private contacts are specific to each Handset. Shared contacts
are available on all Handsets registered to the Cisco SPA232D
(Base). When a Shared contact is entered from a Handset, the
contact is made available to all Handsets registered to the same
Base station.
You can configure up to 100 Private contacts, and 50 Shared
contacts on the Cisco SPA302D.
To configure contacts:
1. Press the center Select button.
2. Select Contacts.
3. Select Private (contacts are stored only on this Handset) or
Shared (contacts are shared and stored among all Handsets
registered to the same Cisco SPA232D).
4. Press the Options softkey to perform one of the following
actions:
•
Add New: Add a new contact. Enter the name and number,
then press the Save softkey. Names and numbers have a
32-character limit.
•
Edit Dial: Retrieves the number from the Contacts list and
opens the dialler window, so that the number can be edited
before dialling. Press the Right and Left Arrow buttons to
30
Owner's Manual