Cisco SPA302D 소유자 매뉴얼 - 페이지 43
{카테고리_이름} Cisco SPA302D에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco SPA302D 49 페이지. Mobility enhanced cordless handset
Cisco SPA302D에 대해서도 마찬가지입니다: 사용자 설명서 (38 페이지), 데이터시트 (7 페이지), 사용자 설명서 (10 페이지), 빠른 시작 매뉴얼 (2 페이지)
페이지 인쇄
Configuring Network Settings:
please call Customer Service.
SIP Settings:
(Unsupported)
Service.
Changing Your Ringtone
To change your Handset ringtone:
1. From the Settings menu, choose Ringtones.
2. Press the Up and Down Arrow buttons to select a ringtone. A
preview of the ringtone plays.
3. Press Save to save the selected ringtone as the ringtone for
your Handset.
Configuring Keypad and Call Park Tones
You can configure a tone to play when keys on the Handset are
pressed or when a phone call is parked. To configure tones:
1. From the Settings menu, choose Tones.
2. Press the Up and Down Arrow buttons to select the tone set-
ting that you want to change. Press the Right and Left arrow
buttons to turn the tone on or off.
3. Press Save to save your changes.
Configuring the Backlight Timeout Setting
You can configure the amount of time that the Handset display
screen remains lit before it is turned off to conserve battery
power. To configure the timeout setting:
1. From the Settings menu, choose Backlight Settings.
2. Press the Right and Left Arrow buttons to choose from 15, 30,
or 60 seconds.
3. Press Save.
Configuring and Using Speed Dials
You can configure up to 9 speed dials (numbers 2 through 9 and
0) on your Handset. A speed dial number can be configured by
pressing and holding an unassigned number on the keypad, or by
using the Call Settings menu on the Handset.
Creating Speed Dials
To create a speed dial by choosing an unassigned number on the
phone keypad:
1. Press and hold the number (2 through 9 or 0).
2. When the message appears asking you to confirm the speed
dial entry, press the Left softkey to Confirm.
Perform one of the following actions:
43
(Unsupported)
For assistance,
For assistance, please call Customer
Owner's Manual