Cisco SPA302D 소유자 매뉴얼 - 페이지 47

{카테고리_이름} Cisco SPA302D에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco SPA302D 49 페이지. Mobility enhanced cordless handset
Cisco SPA302D에 대해서도 마찬가지입니다: 사용자 설명서 (38 페이지), 데이터시트 (7 페이지), 사용자 설명서 (10 페이지), 빠른 시작 매뉴얼 (2 페이지)

페이지 인쇄

Troubleshooting the Cisco SPA302D

Advanced troubleshooting is performed by phone system

administrators and is not covered in this document. However, some

common problems and solutions are described below.

No Network Message

If a "No Network" message is displayed on the phone screen, the

WAN interface of the Cisco SPA232D is not connected to the

network. This means that the Cisco SPA232D cannot connect to

the Internet and some functions are unavailable. Try the following

actions:

1. Make sure the Internet connection is active.

2. Check the cable connecting the WAN interface of the Cisco

SPA232D to the Internet source (for example, the cable mo-

dem) to make sure it is functional.

3. Reboot the Cisco SPA232D.

Unresponsive Handset

If the Handset is unresponsive after a few moments, press the End

Call

button to turn the Handset off. Wait a few moments and

then press the End Call button again to turn the Handset back on.

If the Handset is still unresponsive, remove the batteries for a few

moments to "reboot" the Handset, and then replace the batteries.

Note: There is no "hard reset" button on the Handset.

Handset will not Turn On (Screen will not Illuminate)

1. Follow Instructions for correctly installing batteries.

2. Follow Instructions to Turn On Handset3.

Owner's Manual