Ricoh Aficio AP4510 보충 설명서 - 페이지 11

{카테고리_이름} Ricoh Aficio AP4510에 대한 보충 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Ricoh Aficio AP4510 38 페이지. Sap printing
Ricoh Aficio AP4510에 대해서도 마찬가지입니다: 사용 설명서 (32 페이지), 교체 매뉴얼 (2 페이지), 설치 절차 (2 페이지), 설치 매뉴얼 (4 페이지), 매뉴얼 (12 페이지), 빠른 설치 매뉴얼 (2 페이지)

페이지 인쇄

❖ ❖ ❖ ❖ Adding an entry to the /etc/printcap file

The following entry is added to the /etc/printcap file, which is the configu-

ration for printing with the lpr command. In order to use the lpr command to

print, you need to edit the /etc/hosts file, add an entry for the network print-

er to the /etc/printcap file and create a spool directory.

##PRINTTOOL3## REMOTE

np|Network Printer:\

:rm=nphost:\

:rp=option:\

:sd=/var/spool/lpd/npd:\

:lf=/var/log/npd-errs:\

:sh:\

:mx#0:

Note

❒ The /etc/printcap file is used to register the name and attributes of a print-

er. You must make an entry for the network printer in the /etc/printcap

file of all workstations using the network printer.

❒ Each entry is separated with colons into several fields. The syntax is to be-

gin each entry with a colon, followed by the entry, and then end with a co-

lon, a back slash, and then a return.

❒ The first line of the field is the name of the printer. You use this name when

logging on to a network printer from a workstation. You can define several

different names by separating each name with the "|" character.

❒ The second and following lines contain the printer's attributes. Attributes

of the printer are represented by two character names referred to as capa-

bilities. For more information about capabilities, see the following table.

Capability

Explanation

Host name of the printer

Optional specification

"lp" will be assigned, if the option

is not used.

Path name of the spool directory.

Path name of the log file.

Maximum file size which the di-

rectory can copy. When set to 0, the

size is unlimited. If nothing is en-

tered, the size is set to 1024 k.

Using the Installation Shell Script

Value Required for the Network

Printer.

The host name that was registered

with the /etc/hosts file.

Select options for printing. For

more information about available

options, see p.16 "Specifying the

Device Option".

Path name of the spool directory

that is to be created.

Path name of the log file.

For example /var/log/lpd-errs.

None or something suitable.