Ricoh Aficio CL3000 옵션 매뉴얼 - 페이지 17
{카테고리_이름} Ricoh Aficio CL3000에 대한 옵션 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Ricoh Aficio CL3000 48 페이지. Sap printing
Ricoh Aficio CL3000에 대해서도 마찬가지입니다: 매뉴얼 (49 페이지), 설치 매뉴얼 (3 페이지), 빠른 설치 매뉴얼 (4 페이지), 보충 설명서 (3 페이지), 보충 설명서 (38 페이지), 매뉴얼 (12 페이지)
![Ricoh Aficio CL3000 옵션 매뉴얼](/uploads/products/server2/5361052/5361052.png)
Memory Unit Type C (SDRAM Module)
R CAUTION:
• Do not touch the inside of the
controller board compartment. It
may cause a machine malfunc-
tion or a burn.
Important
❒ Before touching the Memory Unit,
touch something metal to dis-
charge any static electricity. Static
electricity can damage the Memo-
ry Unit.
❒ Do not subject the Memory Unit to
physical shocks.
A A A A
Turn off the power, and then un-
plug the power cable.
B B B B
Remove the two screws that fas-
ten the controller board on the
back of the printer.
The removed screws will be used
G
in step
to fasten the controller
board.
Memory Unit Type C (SDRAM Module)
C C C C
While holding the handle, pull
out the controller board slowly.
There are two slots for the Memory
Unit. Use the available slot (the
one in the front in the illustration
B) to install an optional Memory
Unit
Important
❒ In order to install the maximum
ZHBP080E
384 MB memory, remove the
standard Memory Unit A, and
then replace with the 128 MB
Memory Unit. Then install the
256 MB Memory Unit onto the
other slot (the one in the front in
the illustration B).
❒ When using only one Memory
Unit, be sure to use the slot in
the back shown in the illustra-
tion A.
1
ZHBP020E
ZHBP100E
13