Ricoh Aficio CL3000 Options Manual - Page 17

Browse online or download pdf Options Manual for Printer Ricoh Aficio CL3000. Ricoh Aficio CL3000 48 pages. Sap printing
Also for Ricoh Aficio CL3000: Manual (49 pages), Install Manual (3 pages), Quick Installation Manual (4 pages), Supplementary Manual (3 pages), Supplement Manual (38 pages), Manual (12 pages)

Print Page

Memory Unit Type C (SDRAM Module)

R CAUTION:

• Do not touch the inside of the

controller board compartment. It

may cause a machine malfunc-

tion or a burn.

Important

❒ Before touching the Memory Unit,

touch something metal to dis-

charge any static electricity. Static

electricity can damage the Memo-

ry Unit.

❒ Do not subject the Memory Unit to

physical shocks.

A A A A

Turn off the power, and then un-

plug the power cable.

B B B B

Remove the two screws that fas-

ten the controller board on the

back of the printer.

The removed screws will be used

in step

to fasten the controller

board.

Memory Unit Type C (SDRAM Module)

C C C C

While holding the handle, pull

out the controller board slowly.

There are two slots for the Memory

Unit. Use the available slot (the

one in the front in the illustration

B) to install an optional Memory

Unit

Important

❒ In order to install the maximum

ZHBP080E

384 MB memory, remove the

standard Memory Unit A, and

then replace with the 128 MB

Memory Unit. Then install the

256 MB Memory Unit onto the

other slot (the one in the front in

the illustration B).

❒ When using only one Memory

Unit, be sure to use the slot in

the back shown in the illustra-

tion A.

ZHBP020E

ZHBP100E