Cisco UNIFIED 6911 관리 매뉴얼 - 페이지 9

{카테고리_이름} Cisco UNIFIED 6911에 대한 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco UNIFIED 6911 12 페이지. Telefone ip cisco unified
Cisco UNIFIED 6911에 대해서도 마찬가지입니다: 데이터시트 (5 페이지), 관리 매뉴얼 (10 페이지), 사용자 설명서 (15 페이지), 사용자 설명서 (50 페이지), 빠른 참조 카드 (2 페이지), 매뉴얼 (10 페이지), 매뉴얼 (28 페이지), (포르투갈어) 빠른 시작 (1 페이지)

Cisco Unified IP Phone and Telephony Networks

• Quickly enter phones into the Cisco Unified Communications Manager database and modify any settings,

• Move autoregistered phones to new locations and assign them to different device pools without affecting

Note

Cisco recommends you use autoregistration to add less than 100 phones to your network. To add more

than 100 phones to your network, use the Bulk Administration Tool (BAT). See

Phone Template, on page

The system disables autoregistration by default. In some cases, you might not want to use autoregistration;

for example, if you want to assign a specific directory number to the phone. For information about enabling

autoregistration, see the "Enabling Autoregistration" section in the Cisco Unified Communications Manager

Administration Guide.

When you configure the cluster for mixed mode through the Cisco CTL client, autoregistration automatically

Note

disables. When you configure the cluster for nonsecure mode through the Cisco CTL client, autoregistration

automatically enables.

Autoregistration and TAPS Phone Addition

You can add phones with autoregistration the Tool for Auto-Registered Phones Support (TAPS), without first

gathering MAC addresses from phones.

TAPS works with the Bulk Administration Tool (BAT) to update a batch of phones that were already added

to the Cisco Unified Communications Manager database with dummy MAC addresses. Use TAPS to update

MAC addresses and download predefined phone configuration files.

Cisco recommends you use autoregistration and TAPS to add less than 100 phones to your network. To

Note

add more than 100 phones to your network, use the Bulk Administration Tool (BAT). See

Using BAT Phone Template, on page

To implement TAPS, you or the end user dial a TAPS directory number and follow the voice prompts. When

the process completes, the phone has downloaded the directory number and other settings, and the

Cisco Unified Communications Manager database contains the correct MAC address for the phone.

Autoregistration must be enabled in Cisco Unified Communications Manager (System > Cisco Unified CM)

for TAPS to function.

Note

When you configure the cluster for mixed mode through the Cisco CTL client, autoregistration is

automatically disabled. When you configure the cluster for nonsecure mode through the Cisco CTL client,

autoregistration is automatically enabled.

For more information, see the "Bulk Administration" chapter in Cisco Unified Communications Manager

Administration Guide.

such as the directory numbers, from Cisco Unified Communications Manager.

their directory numbers.

10.

Cisco Unified IP Phone 6901 and 6911 Administration Guide for Cisco Unified Communications Manager 10.0 (SCCP

Autoregistration and TAPS Phone Addition

10.

Add Phones Using BAT

Add Phones

and SIP)