Cisco Unified 7905G 네트워크 설정 구성 - 페이지 32
{카테고리_이름} Cisco Unified 7905G에 대한 네트워크 설정 구성을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Unified 7905G 34 페이지. Ip talk series
Cisco Unified 7905G에 대해서도 마찬가지입니다: 사용자 설명서 (21 페이지), 데이터시트 (5 페이지), 사용자 설명서 (25 페이지), 전화 매뉴얼 (46 페이지), 빠른 참조 (2 페이지), 사용자 설명서 (20 페이지), 참조 매뉴얼 (20 페이지)
페이지 인쇄
Configuring CDP
Assigning a Backup TFTP Server
Using the Phone Network Configuration Screen
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
Configuring CDP
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 4.2, Cisco Unified IP Phone
4-32
TFTP Server 2 displays the IP address of the backup TFTP server. This server is
used to obtain configuration files and software upgrades if the primary TFTP
server is unavailable.
Before you can assign a backup TFTP server, the Alternate TFTP setting must
be set to Yes.
To assign a backup TFTP server, follow these steps:
Procedure
Display the Network Configuration menu.
For instructions, see the
on page
4-4.
Unlock Network Configuration menu options.
For instructions, see the
Configuration Menu" section on page
Scroll to TFTP Server 2.
Press the Edit softkey.
Enter the new Alternative TFTP Server address.
For information about entering values, see the
the Network Configuration Menu" section on page
Press the Validat softkey.
Press Save.
You can disable or enable Cisco Discovery Protocol (CDP). CDP allows the phone
to be discovered by the CiscoWorks network management system.
Chapter 4
Configuring Network Settings on the Cisco Unified IP Phone
"Displaying the Network Configuration Menu" section
"Unlocking and Locking Options on the Network
4-5.
"Guidelines for Editing Settings in
4-6.
OL-8617-01