Cisco Unified 7905G Configuring Network Settings - Page 32

Browse online or download pdf Configuring Network Settings for IP Phone Cisco Unified 7905G. Cisco Unified 7905G 34 pages. Ip talk series
Also for Cisco Unified 7905G: User Manual (21 pages), Datasheet (5 pages), User Manual (25 pages), Phone Manual (46 pages), Quick Reference (2 pages), User Manual (20 pages), Reference Manual (20 pages)

Print Page
Cisco Unified 7905G Configuring Network Settings
Configuring CDP

Assigning a Backup TFTP Server

Using the Phone Network Configuration Screen
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
Configuring CDP
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 4.2, Cisco Unified IP Phone
4-32
TFTP Server 2 displays the IP address of the backup TFTP server. This server is
used to obtain configuration files and software upgrades if the primary TFTP
server is unavailable.
Before you can assign a backup TFTP server, the Alternate TFTP setting must
be set to Yes.
To assign a backup TFTP server, follow these steps:
Procedure
Display the Network Configuration menu.
For instructions, see the
on page
4-4.
Unlock Network Configuration menu options.
For instructions, see the
Configuration Menu" section on page
Scroll to TFTP Server 2.
Press the Edit softkey.
Enter the new Alternative TFTP Server address.
For information about entering values, see the
the Network Configuration Menu" section on page
Press the Validat softkey.
Press Save.
You can disable or enable Cisco Discovery Protocol (CDP). CDP allows the phone
to be discovered by the CiscoWorks network management system.
Chapter 4
Configuring Network Settings on the Cisco Unified IP Phone
"Displaying the Network Configuration Menu" section
"Unlocking and Locking Options on the Network
4-5.
"Guidelines for Editing Settings in
4-6.
OL-8617-01