Ricoh SP C260SFNw 설정 매뉴얼 - 페이지 12
{카테고리_이름} Ricoh SP C260SFNw에 대한 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Ricoh SP C260SFNw 17 페이지.
페이지 인쇄
- 1. Setup Guide
- 2. Setting up the Machine
- 3. Installing the Software
- 4. Check How the Computer Is Connected
- 5. Connecting the Machine (Usb/Network)
- 6. Connecting the Machine Via Wi-Fi
- 7. Fax Settings
- 8. Selecting the Telephone Line Type and Telephone Network Connection Type
- 9. Setting the Outside Line Access Number
- 10. Basic Operation for Sending a Fax
- 11. Scan Settings
- 12. Control Panel Sheet
16. Press [Connect].
"Please wait for 2 minutes" appears and connecting with PIN
method starts.
3. FAX settings
Connection
Connect a telephone line cord to LINE.
If using an external telephone, connect the telephone to TEL.
1. Port For LINE
2. Port For External Telephone
10
1
2
DUE040
17. Check the result.
Connection has succeeded:
"Connected to access point." is displayed.
Press [OK] to return to the screen displayed in Step 12, and then press
the [Home] key to return to the initial screen.
Connection has failed:
"Failed to connect to access point." is displayed.
Press [OK] to return to the screen displayed in Step 12. Check the
configuration for the router (access point), then try the connection
again.
18. Configuring the Wi-Fi settings is complete.
DUE041