Ricoh SP C260SFNw 설정 매뉴얼 - 페이지 7
{카테고리_이름} Ricoh SP C260SFNw에 대한 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Ricoh SP C260SFNw 17 페이지.
페이지 인쇄
- 1. Setup Guide
- 2. Setting up the Machine
- 3. Installing the Software
- 4. Check How the Computer Is Connected
- 5. Connecting the Machine (Usb/Network)
- 6. Connecting the Machine Via Wi-Fi
- 7. Fax Settings
- 8. Selecting the Telephone Line Type and Telephone Network Connection Type
- 9. Setting the Outside Line Access Number
- 10. Basic Operation for Sending a Fax
- 11. Scan Settings
- 12. Control Panel Sheet
Connecting the Machine (USB/Network)
● The following items are necessary to set up a wired
connection.
● USB interface cable or Ethernet interface cable
● CD-ROM supplied with the machine
● To install the software for network connection, quick
installation and manual installation can be used. Using
the manual installation, you can specify data to be
installed as you prefer.
1.
Turn on your computer.
2.
Insert the provided CD-ROM into the CD-ROM drive of the
computer.
If your computer does not have a CD-ROM drive, download a
setup file from our website.
or
3.
Click [Quick Install].
4.
The software license agreement appears in the [Software
License Agreement] dialog box. After reading the agreement,
click [Yes].
DUE036
5.
Select [USB Connection] or [Network Connection]
according to communication environment or your device.
6.
Follow the instructions in the setup wizard.
7.
Click [Finish] in the [Setup Complete] dialog box. If the
installer prompt you to restart Windows, reboot your
computer.
Setup is completed.
To use the fax function, configure the settings on page
10 "3. FAX settings".
Windows
DUE037
5