Ricoh SP C420DN-KP - Aficio Color Laser Printer 빠른 설정 매뉴얼 - 페이지 6
{카테고리_이름} Ricoh SP C420DN-KP - Aficio Color Laser Printer에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Ricoh SP C420DN-KP - Aficio Color Laser Printer 11 페이지. Quick setup guide
Ricoh SP C420DN-KP - Aficio Color Laser Printer에 대해서도 마찬가지입니다: 사양 (4 페이지)
페이지 인쇄
HotSpot Printer Quick Setup Guide
Troubleshooting section
No.
Issue
1
Service is not
running, i.e.,
default printer
display
message does
not read: [For
Print
Release,
Press OK]
2
Cannot print
•
Perform the following steps to restart the service:
1.
Turn printer power OFF.
2.
Disconnect the USB keypad cable (from rear of printer).
3.
Turn printer power ON.
4.
Wait approx. 90 seconds after [Ready] is displayed on printer LCD.
5.
Turn printer power OFF.
6.
Reconnect the USB keypad cable.
7.
Turn printer power ON.
8.
Wait approx. 90 seconds after [Ready] is displayed on printer LCD. The
message [Print Release Press OK] should appear on the LCD.
9.
To determine service status, go to No. 2.
•
To check service status press the [?] key on the HotSpot keypad.
The printer LCD will display one of the following messages:
-
[PrinterOn x.x LicenseValid]. Indicates that Mobile Printing Service
application is working properly.
-
[PrinterOn x.x InternetDown]. This indicates that the printer cannot
get proper connection to the Mobile Printing Service Server. Please check
printer network settings (IPv4, DHCP, DNS, etc.). Also see No. 3, below.
-
[PrinterOn x.x NoLicense]. This indicates that the application cannot
get a valid license from the Mobile Printing Service Server. Please check
printer's network settings (IPv4, DHCP, DNS, etc.).Please check that the
printer's time and date are set correctly. See No. 4.
Action