Ricoh 126C-FLEX TLS 매뉴얼 - 페이지 5

{카테고리_이름} Ricoh 126C-FLEX TLS에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Ricoh 126C-FLEX TLS 7 페이지.

Manual exposures

For special effects or other situations where you wish to set the lens manually, merely turn Auto/Manual Ring (B)

until the f stop you desire is aligned with the black indicator marker (Fig. 6).

Holding the camera

When you are ready to take the picture, hold the camera steady, and gently press Shutter Release Button (A) all the

way down.

Viewing and focusing

Changing the lens

To remove the lens for exchanging the lenses, continuously turn the lens counterclockwise until it comes off

(Fig. 8).

To insert the standard lens or telephoto or wide-angle lens, turn lens clockwise until the lens stops.

Look into Viewfinder Eyepiece (K) to compose

your picture and focus the lens. Rotate Focusing

Ring (E) until your subject becomes clear in the

micro-prism focusing screen (Fig. 7).

Since you are viewing through the taking lens

there is no parallax problem what you see in the

viewfinder will

appear in your picture. Even when you shoot close

ups there is no longer danger of accidental

cropping.

Your camera is equipped with a 55 mm lens which is

the proper focal length for general-purpose picture

taking. You may also use Rikenon 100mm telephoto

or 35mm wide-angle lens.