Ricoh FF-90 매뉴얼 - 페이지 7

{카테고리_이름} Ricoh FF-90에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Ricoh FF-90 15 페이지.

SETTING THE FILM SPEED

* Pressing the Manual Film Speed Set Button once stops the flashing of the speed.

1. The film speed is indicated on the outer packaging of the film. e.g. ASA 100 (ISO 100)

2. Press the Manual Film Speed Set Button until the speed of your film is displayed in the LCD Control Panel.

* When the Manual Film Speed Set Button is kept depressed, the speeds adVance automatically.

* Please be careful when you take a picture with ISO 1000 or 1600 film in bright sunlight, the picture may be

overexposed.

Please check whether the film has a DX code system or not.

A film with a DX code

1. Setting the film speed is not necessary. The camera automatically makes the

correct film speed setting. The film speed as well as "DX AUTO" is displayed

on the LCD Control Panel.

A film without DX code

* When the film previously used had a DX code system, "100" flashes in the

LCD Control Panel and if the film

was non-DX, the speed of the previous film flashes.