Ricoh FF-90 매뉴얼 - 페이지 8

{카테고리_이름} Ricoh FF-90에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Ricoh FF-90 15 페이지.

VIEWFINDER

(Fig. 17)

AUTO-FOCUS SHOOTING

1. Field of View Frame

The subject (such as people or scenery) that you wish to take

should be set within this frame.

2. Parallax Correction Marks When taking a picture of

subject that is between 0.8m--1.2m (2.6 - 4 A.) away from the

camera, the subject should be positioned within these marks.

Anything outside the marks will not be included in the picture

even though you can see it through the viewfinder.

3. Auto-Focus Frame The auto-focus system focuses

automatically on any subject that appears within this small

square.

4. Zone Marks These marks indicate the focusing distance.

When the ~ symbol blinks, the subject is too close to the

camera. You should move further away from the subject.

1. Set the subject you wish to take within the Auto

Focus Frame in the center of the Viewfinder.

2. When you press the Shutter Release Button halfway,

the Zone symbol will light up to indicate the focus

distance. If the ~ symbol blinks, you should move back

a little as the camera is too close to the subject.

3. Gently press the Shutter Release Button down to take

the picture. The film will advance automatically as soon

as the shutter has been released,

* Please be careful not to cover the Distance Measuring

Windows at the front of the camera accidentally, as this

will cause incorrect focusing.

* Please keep the Distance Measuring Windows clean

so that focusing is accurate. If it gets dirty, it should be

wiped clean with a soft cloth.

4www.butkus.org