Ricoh GX200 펌웨어 업데이트 지침

{카테고리_이름} Ricoh GX200에 대한 펌웨어 업데이트 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Ricoh GX200 5 페이지. Firmware update
Ricoh GX200에 대해서도 마찬가지입니다: 브로셔 및 사양 (8 페이지)

Firmware Update Instruction Manual

This manual explains the procedures for downloading the GX200 firmware from the Ricoh

website and updating the camera's firmware.

Perform the following operations to update the firmware.

1. Check the firmware version

Caution

Before updating, be sure to check the firmware version through the following method. If the installed firmware is the latest

version, there is no need to update.

Making sure that the camera's power is

turned off, switch the mode dial to SCENE.

While pressing the N (Macro) button, hold

down the 6 (Playback) button for 2-3

seconds.

• The firmware version will be displayed on the

picture display for about 20 seconds.

Check the firmware version displayed on

the picture display.

• e.g. When the firmware version is V1.00, the

version will be shown as [MAIN : V 1.00] as follows:

MAIN : V 1.00

BKUP : V X.XX

MONI : V X.XX

ADJD : V X.XX

EXTD : V X.XX

CPU1 : V X.XX

SH : XXXXXX

ST : XXXXXX

6 (Playback) Button Mode dial

N (Macro) Button