Ricoh GX200 펌웨어 업데이트 지침 - 페이지 4

{카테고리_이름} Ricoh GX200에 대한 펌웨어 업데이트 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Ricoh GX200 5 페이지. Firmware update
Ricoh GX200에 대해서도 마찬가지입니다: 브로셔 및 사양 (8 페이지)

페이지 인쇄
Ricoh GX200 펌웨어 업데이트 지침
10.

For Windows

When the copying of the firmware is completed, double-click the [Safely
Remove Hardware] icon in the task bar.

For Macintosh

Drag and drop the [RICOHDCX] icon to the [Trash] icon. Once the icon
has disappeared, proceed to Step 14.
Caution
If you skip the procedures in Step 10, the firmware copy may not be successful.
11.
Select [USB Mass Storage Device], and click [Stop].
12.
Click [OK].
13.
Click the [Close] button.
14.
Turn the camera off, and disconnect the USB cable.
To copy the firmware using a card reader or a card writer to an SD memory
card
1.
Copy the files [claunch3] and [claunch8] (created when the firmware was
extracted) into the root directory of the SD memory card.
2.
Load the camera with the SD memory card which the firmware was copied
to.
4