Ricoh GX200 Instructies voor firmware-update - Pagina 4
Blader online of download pdf Instructies voor firmware-update voor {categorie_naam} Ricoh GX200. Ricoh GX200 5 pagina's. Firmware update
Ook voor Ricoh GX200: Brochure & specificaties (8 pagina's)
Pagina afdrukken
10.
For Windows
When the copying of the firmware is completed, double-click the [Safely
Remove Hardware] icon in the task bar.
For Macintosh
Drag and drop the [RICOHDCX] icon to the [Trash] icon. Once the icon
has disappeared, proceed to Step 14.
Caution
If you skip the procedures in Step 10, the firmware copy may not be successful.
11.
Select [USB Mass Storage Device], and click [Stop].
12.
Click [OK].
13.
Click the [Close] button.
14.
Turn the camera off, and disconnect the USB cable.
To copy the firmware using a card reader or a card writer to an SD memory
card
1.
Copy the files [claunch3] and [claunch8] (created when the firmware was
extracted) into the root directory of the SD memory card.
2.
Load the camera with the SD memory card which the firmware was copied
to.
4