Ricoh Aficio MP C3002 빠른 시작 매뉴얼 - 페이지 3
{카테고리_이름} Ricoh Aficio MP C3002에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Ricoh Aficio MP C3002 24 페이지. Papercut ricoh embedded manual
Ricoh Aficio MP C3002에 대해서도 마찬가지입니다: 사용자 설명서 (41 페이지), 브로셔 및 사양 (8 페이지)
페이지 인쇄
Use [Batch] mode when:
a) the number of pages being fed into the document feeder exceeds the feeder capacity, or
b) you need to feed documents from the feeder and from the platen glass, or
c) you need to feed pages from different sources, but want to keep the page order and output
multiple complete sets.
1. Insert pages in the document feeder
2. Adjust guides
-or-
1.
Lift the Platen Glass lid and place
documents face down on the glass at
the position of arrow, regardless of size.
3. Select Copier from the Home Screen
Using Batch Mode
4. Select Special Original from the Copier Screen
5. Select [Batch], and then press [OK].
6. Enter your job settings, including the desired number of copies.
7. Place the first part of the originals in the feeder (or on the glass) and press [Start] key.
8. After those originals have been scanned, place the next batch, pressing [Start] each time a new
page (platen) or group of pages (feeder) is added, and continue until all the pages for your job are
complete.
9. Press the [#] key to release the complete job.
Note: if copies are not stapled, the machine will deliver the first copies as they are scanned and
will release the additional copies after the # key has been selected.
Page 3