Ricoh Aficio SP 5210SR 초기 매뉴얼 - 페이지 14
{카테고리_이름} Ricoh Aficio SP 5210SR에 대한 초기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Ricoh Aficio SP 5210SR 48 페이지. Ricoh initial guide for scanner and fax
Ricoh Aficio SP 5210SR에 대해서도 마찬가지입니다: 모범 사례 매뉴얼 (25 페이지), 빠른 매뉴얼 (6 페이지)
페이지 인쇄
1. Using the Scanner Function
14.
Make sure that "IPv4" is set to [Active].
If [Active] is not selected, press [Active].
15.
Press [OK].
1
16.
Press [Exit].
17.
Press the [User Tools/Counter] key.
Configuring the SMTP Settings
This section describes how to configure the SMTP settings.
The host name must be specified if DNS is being used.
1.
Press the [User Tools/Counter] key.
2.
Press [System Settings].
3.
Press [File Transfer].
4.
Press [SMTP Server].
5.
Press [Change] for "Server Name".
6.
Enter the SMTP server host name or IPv4 address, and then press [OK].
7.
To change the port number, press [Change] for "Port No.", enter the port number using
the number keys, and then press [ ].
8.
Press [OK].
9.
Press [Exit].
10.
Press the [User Tools/Counter] key.
Configuring the DNS Settings
This section describes how to configure the DNS settings.
If the machine is configured to obtain an IPv4 address automatically, "DNS Configuration" is also set to
"Auto-Obtain (DHCP)".
The following procedure explains how to configure the DNS server's IPv4 address manually.
Enter the IPv4 address as "xxx.xxx.xxx.xxx" ("x" indicates a number).
1.
Press the [User Tools/Counter] key.
2.
Press [System Settings].
3.
Press [Interface Settings].
4.
Press [DNS Configuration].
5.
Press [Specify].
12