Ricoh Aficio SP 5210SR 초기 매뉴얼 - 페이지 13

{카테고리_이름} Ricoh Aficio SP 5210SR에 대한 초기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Ricoh Aficio SP 5210SR 48 페이지. Ricoh initial guide for scanner and fax
Ricoh Aficio SP 5210SR에 대해서도 마찬가지입니다: 모범 사례 매뉴얼 (25 페이지), 빠른 매뉴얼 (6 페이지)

페이지 인쇄
Ricoh Aficio SP 5210SR 초기 매뉴얼
2.
Press [System Settings].
3.
Press [Interface Settings].
4.
Press [Machine IPv4 Address].
5.
Make sure that [Auto-Obtain (DHCP)] is selected.
If [Auto-Obtain (DHCP)] is not selected, press [Auto-Obtain (DHCP)].
6.
Press [OK].
7.
Press [Effective Protocol].
8.
Make sure that "IPv4" is set to [Active].
If [Active] is not selected, press [Active].
9.
Press [OK].
10.
Press [Exit].
11.
Press the [User Tools/Counter] key.
Assigning the machine's IPv4 address manually
Enter the IPv4 address and subnet mask as "xxx.xxx.xxx.xxx" ("x" indicates a number).
When you enter the machine's IPv4 address manually, make sure that IPv4 address is different from that
of other machines on the network.
1.
Press the [User Tools/Counter] key.
2.
Press [System Settings].
3.
Press [Interface Settings].
4.
Press [Machine IPv4 Address].
5.
Press [Specify].
6.
Press [Change] for "Machine IPv4 Address".
7.
Enter the machine's IPv4 address using the number keys, and then press [ ].
To move between sections, press [ ] or [ ].
8.
Press [Change] for "Subnet Mask".
9.
Enter the subnet mask using the number keys, and then press [ ].
To move between sections, press [ ] or [ ].
10.
Press [OK].
11.
Press [IPv4 Gateway Address].
12.
Enter the IPv4 gateway address using the number keys, and then press [ ].
13.
Press [Effective Protocol].
Preparation for Sending Scanned Files via a Network
1
11