Ricoh Aficio SP 5210SR Manual inicial - Página 13
Procurar online ou descarregar pdf Manual inicial para Copiadora Ricoh Aficio SP 5210SR. Ricoh Aficio SP 5210SR 48 páginas. Ricoh initial guide for scanner and fax
Também para Ricoh Aficio SP 5210SR: Manual de Boas Práticas (25 páginas), Manual rápido (6 páginas)
Imprimir página
2.
Press [System Settings].
3.
Press [Interface Settings].
4.
Press [Machine IPv4 Address].
5.
Make sure that [Auto-Obtain (DHCP)] is selected.
If [Auto-Obtain (DHCP)] is not selected, press [Auto-Obtain (DHCP)].
6.
Press [OK].
7.
Press [Effective Protocol].
8.
Make sure that "IPv4" is set to [Active].
If [Active] is not selected, press [Active].
9.
Press [OK].
10.
Press [Exit].
11.
Press the [User Tools/Counter] key.
Assigning the machine's IPv4 address manually
Enter the IPv4 address and subnet mask as "xxx.xxx.xxx.xxx" ("x" indicates a number).
When you enter the machine's IPv4 address manually, make sure that IPv4 address is different from that
of other machines on the network.
1.
Press the [User Tools/Counter] key.
2.
Press [System Settings].
3.
Press [Interface Settings].
4.
Press [Machine IPv4 Address].
5.
Press [Specify].
6.
Press [Change] for "Machine IPv4 Address".
7.
Enter the machine's IPv4 address using the number keys, and then press [ ].
To move between sections, press [ ] or [ ].
8.
Press [Change] for "Subnet Mask".
9.
Enter the subnet mask using the number keys, and then press [ ].
To move between sections, press [ ] or [ ].
10.
Press [OK].
11.
Press [IPv4 Gateway Address].
12.
Enter the IPv4 gateway address using the number keys, and then press [ ].
13.
Press [Effective Protocol].
Preparation for Sending Scanned Files via a Network
1
11