Ricoh 4372-002 사용자 설명서 - 페이지 16
{카테고리_이름} Ricoh 4372-002에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Ricoh 4372-002 50 페이지. Printer driver
페이지 인쇄
Chapter 2 Print from Windows Vista/Server 2008/7/Server 2008 R2
Even if [LPR Port] is displayed in the list, be sure
to select [Standard TCP/IP Port].
7
Click the [Next] button.
8
Enter the printer's IP address in the [Printer Name or
IP Address] field, and then click the [Next] button.
Under [Port Name], you can also change to any
name.
9
Select [Custom], and then click the [Settings] button.
10
Under [Protocol], select [LPR]. Enter the logical
printer name in [Queue Name] and turn on (check)
[LPR Byte Counting Enabled] and turn off (uncheck)
[SNMP Status Enabled], and then select [OK].
The logical printer is configured on the printer unit.
The logical printer such as "postscript" is pre-defined.
Use "postscript" as the logical printer name in factory
default settings. Enter "postscript" in lower-case
alphabetic letters. For information about how to
configure the network printer, see "User's Guide" that
came with the product.
11
Click the [Next] button.
OG
A
01
2-6