Ricoh 4372-002 Panduan Pengguna - Halaman 16

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Aksesori Printer Ricoh 4372-002. Ricoh 4372-002 50 halaman. Printer driver

Chapter 2 Print from Windows Vista/Server 2008/7/Server 2008 R2

Even if [LPR Port] is displayed in the list, be sure

to select [Standard TCP/IP Port].

Click the [Next] button.

Enter the printer's IP address in the [Printer Name or

IP Address] field, and then click the [Next] button.

Under [Port Name], you can also change to any

name.

Select [Custom], and then click the [Settings] button.

Under [Protocol], select [LPR]. Enter the logical

printer name in [Queue Name] and turn on (check)

[LPR Byte Counting Enabled] and turn off (uncheck)

[SNMP Status Enabled], and then select [OK].

The logical printer is configured on the printer unit.

The logical printer such as "postscript" is pre-defined.

Use "postscript" as the logical printer name in factory

default settings. Enter "postscript" in lower-case

alphabetic letters. For information about how to

configure the network printer, see "User's Guide" that

came with the product.

Click the [Next] button.

2-6