Ricoh Container Stacker 포장 풀기 및 설정 지침 - 페이지 29

{카테고리_이름} Ricoh Container Stacker에 대한 포장 풀기 및 설정 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Ricoh Container Stacker 49 페이지.

8. Connect the AF cable of 4 pin white connector coming from the Container

Stacker 2 to the J680 on the ST09X P/K of the Container Stacker 1. (Connection 1

on the following illustration)

9. Take out the CST AC cable of 2 pin white connector from the Container Stacker 1

and connect it to the CST AC cable of 2 pin white connector of the Container

Stacker 2. (Connection 2 on the following illustration)

10. Take out the RB cable from the Container Stacker 1 and connect it to the RB

cable of Container Stacker 2. (Connection 3 on the following illustration)

11. Mount the CST FG cable coming from Container Stacker 1 on the frame of

Container Stacker 2 using M4 Screw (Connection 4 on the following illustration).

NOTE

Put the cable through opening "A" of the Printer.

On SW1 mounted on the CPXXX P/K, set switch No. 4 and No. 5 to ON

and set No. 2 and No. 8 to OFF. (Front Engine of 184 ppm)

Printer

1-24

Container Stacker Installation Instructions

RB cable

(For Container Stacker 2)

M4 screw

Connection 4

CST FG cable

Disconnection 1

(4 pin white)

184 ppm: Connect the CS Relay Cable (see Page 19 Step 21.

RB cable

(For Container Stacker 1)

AF cable

Connection 3

(4 pin white)

Container Stacker

(W/ Through path)

Connection 2

(2 pin white)

CST AC cable

70/92 ppm

Container Stacker 1

(W/ Sample tray)

Opening "A"

Connection 1

(20 pin black)

Disconnection 2

(2 pin white)