Ricoh Container Stacker Ambalajdan Çıkarma ve Kurulum Talimatları - Sayfa 29
Yazıcı Aksesuarları Ricoh Container Stacker için çevrimiçi göz atın veya pdf Ambalajdan Çıkarma ve Kurulum Talimatları indirin. Ricoh Container Stacker 49 sayfaları.
Sayfayı Yazdır
8. Connect the AF cable of 4 pin white connector coming from the Container
Stacker 2 to the J680 on the ST09X P/K of the Container Stacker 1. (Connection 1
on the following illustration)
9. Take out the CST AC cable of 2 pin white connector from the Container Stacker 1
and connect it to the CST AC cable of 2 pin white connector of the Container
Stacker 2. (Connection 2 on the following illustration)
10. Take out the RB cable from the Container Stacker 1 and connect it to the RB
cable of Container Stacker 2. (Connection 3 on the following illustration)
11. Mount the CST FG cable coming from Container Stacker 1 on the frame of
Container Stacker 2 using M4 Screw (Connection 4 on the following illustration).
NOTE
Put the cable through opening "A" of the Printer.
On SW1 mounted on the CPXXX P/K, set switch No. 4 and No. 5 to ON
and set No. 2 and No. 8 to OFF. (Front Engine of 184 ppm)
Printer
1-24
Container Stacker Installation Instructions
:
RB cable
(For Container Stacker 2)
M4 screw
Connection 4
CST FG cable
Disconnection 1
(4 pin white)
184 ppm: Connect the CS Relay Cable (see Page 19 Step 21.
RB cable
(For Container Stacker 1)
AF cable
Connection 3
(4 pin white)
2
Container Stacker
(W/ Through path)
Connection 2
(2 pin white)
CST AC cable
70/92 ppm
Container Stacker 1
(W/ Sample tray)
Opening "A"
Connection 1
(20 pin black)
Disconnection 2
(2 pin white)