Ricoh Container Stacker Ambalajdan Çıkarma ve Kurulum Talimatları - Sayfa 31
Yazıcı Aksesuarları Ricoh Container Stacker için çevrimiçi göz atın veya pdf Ambalajdan Çıkarma ve Kurulum Talimatları indirin. Ricoh Container Stacker 49 sayfaları.
Sayfayı Yazdır
Installation of Container Stacker 2 and Standard Finisher
Refer to "Standard Finisher Installation Instruction" for unpacking and preparation for
installation of the Standard Finisher.
Standard Finisher (70 ppm)
1. Remove the two M3 Screws and the Discharging Brush from Container Stacker 2.
2. Install the Guide Plate (G) together with the Discharging Brush and secure them
with two M3 Screws.
3. Install the Guide Plate (H), Connecting Stay and Main MT Plate.
Connecting Stay
M4 Screws
M3 Screws
M3 Screws
w/Washer
M4 Screws
4. Remove the Rear Covers from the Printer, Container Stacker 2 and standard
Finisher.
NOTE
Refer to the "Standard Finisher Installation Instruction" regarding
unpacking and installation of the Finisher.
1-26
Container Stacker Installation Instructions
Guide Plate (G)
Guide Plate (H)
Main MT Plate
:
Container Stacker 2
Static Electricity Eliminator