Ricoh Container Stacker Ambalajdan Çıkarma ve Kurulum Talimatları - Sayfa 33
Yazıcı Aksesuarları Ricoh Container Stacker için çevrimiçi göz atın veya pdf Ambalajdan Çıkarma ve Kurulum Talimatları indirin. Ricoh Container Stacker 49 sayfaları.
Sayfayı Yazdır
8. Connect the AF cable of 4 pin white and 20 pin black connectors and coming
from the Container Stacker 2 to the connectors CN9 and CN10 of the Finisher.
(Connection 1 and 2 on the illustration below)
NOTE
Put the cable through opening "A" of Container Stacker 2.
On SW1 mounted on the CPXXX P/K of the Printer, set switch No. 5 and
No. 8 to ON and set switch No. 2 to OFF.
Printer
9. Install the Rear Covers of the Printer, Container Stacker 2 and Standard Finisher.
Install the connecting cover between the Container Stacker and the Standard
Finisher.
1-28
Container Stacker Installation Instructions
:
Disconnection 1
(4 pin white)
70/92 ppm
184 ppm: Connect the CS Relay Cable
(see Page 19 Step 21).
AF Cable
Opening A
Container Stacker 2
(with Throughpath)
Disconnection 2
(2 pin white)
Connection 2
(20 pin black)
Standard
Finisher
Connection 1
(4 pin white)