Ricoh Container Stacker 포장 풀기 및 설정 지침 - 페이지 7

{카테고리_이름} Ricoh Container Stacker에 대한 포장 풀기 및 설정 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Ricoh Container Stacker 49 페이지.

Tools Required

The following tools are required:

Phillips Screwdriver

No. 2 shaft length: approx. 100 mm

Adjustable open end wrench (Span; 30mm)

IC Gripper

Observe the following safety instructions for safe unpacking and installation.

1. Keep the work area clean and free of loose parts.

2. Wear suitable clothing. Pay attention to ties, sleeves, and shirts so that they are

not caught in the equipment.

3. Work in a stable position. Working in a strained position may cause injury.

4. If you must move the equipment, be sure the path is clear of obstacles and high

voltage areas or wires.

5. Unplug the equipment before cleaning. Unplug the Printer from the outlet before

cleaning the inside of the Printer and label the power cord plug to prevent other

persons from plugging it in while you are cleaning.

6. Be sure to use the proper tools that are in good condition. Use of worn or

improper tools can cause injury.

1-2

Container Stacker Installation Instructions

TOOL

Cutter

Level

APPLICATION

For unpacking

For installing the Printer and Containter Stacker

For adjustment of leveling bolts

For replacement of nv-RAM

For installation of the Printer and Container

Stacker