Ricoh Container Stacker Uitpakken en installatie-instructies - Pagina 7
Blader online of download pdf Uitpakken en installatie-instructies voor {categorie_naam} Ricoh Container Stacker. Ricoh Container Stacker 49 pagina's.
Pagina afdrukken
Tools Required
The following tools are required:
Phillips Screwdriver
No. 2 shaft length: approx. 100 mm
Adjustable open end wrench (Span; 30mm)
IC Gripper
Important Safety Instructions
Observe the following safety instructions for safe unpacking and installation.
1. Keep the work area clean and free of loose parts.
2. Wear suitable clothing. Pay attention to ties, sleeves, and shirts so that they are
not caught in the equipment.
3. Work in a stable position. Working in a strained position may cause injury.
4. If you must move the equipment, be sure the path is clear of obstacles and high
voltage areas or wires.
5. Unplug the equipment before cleaning. Unplug the Printer from the outlet before
cleaning the inside of the Printer and label the power cord plug to prevent other
persons from plugging it in while you are cleaning.
6. Be sure to use the proper tools that are in good condition. Use of worn or
improper tools can cause injury.
1-2
Container Stacker Installation Instructions
TOOL
Cutter
Level
APPLICATION
For unpacking
For installing the Printer and Containter Stacker
For adjustment of leveling bolts
For replacement of nv-RAM
For installation of the Printer and Container
Stacker