Ricoh M3 현장 서비스 매뉴얼 - 페이지 29
{카테고리_이름} Ricoh M3에 대한 현장 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Ricoh M3 42 페이지. Smart operation panel
Ricoh M3에 대해서도 마찬가지입니다: 현장 서비스 매뉴얼 (18 페이지)
페이지 인쇄3. System Maintenance
System Maintenance
Basic Operation
Switching the Power OFF before Performing Maintenance (before Disconnecting the
Power Supply Plug)
1.
Press the power switch while pressing the [STOP] key.
Continue pressing the [STOP] key until "Shutting Down" is displayed.
• Shutdown can be performed in a short time even when the Quick Startup Mode is set.
Switching the Power OFF before Upgrading the MFP (Controller/Engine) Version
1.
Press the power switch while pressing the [STOP] key.
Continue pressing the [STOP] key until "Shutting Down" is displayed.
• When upgrading the Android screen firmware version, switch the power OFF by the normal
procedure.
Reset Procedure If the Android Screen Freezes
• If reset is performed when the Android screen is in operation, data stored in the Android screen
may be corrupted.
1.
Press the reset button on the left side of the control unit in order to reboot the control unit.
Maintenance Modes
The different service modes and their roles are as follows.
* For security reasons, the specific methods for switching between service modes are not given here.
Please check according to the usual procedure.
27