Ricoh M3 Handleiding voor buitendienst - Pagina 29

Blader online of download pdf Handleiding voor buitendienst voor {categorie_naam} Ricoh M3. Ricoh M3 42 pagina's. Smart operation panel
Ook voor Ricoh M3: Handleiding voor buitendienst (18 pagina's)

Pagina afdrukken

3. System Maintenance

System Maintenance

Basic Operation

Switching the Power OFF before Performing Maintenance (before Disconnecting the
Power Supply Plug)
1.
Press the power switch while pressing the [STOP] key.
Continue pressing the [STOP] key until "Shutting Down" is displayed.
• Shutdown can be performed in a short time even when the Quick Startup Mode is set.

Switching the Power OFF before Upgrading the MFP (Controller/Engine) Version

1.
Press the power switch while pressing the [STOP] key.
Continue pressing the [STOP] key until "Shutting Down" is displayed.
• When upgrading the Android screen firmware version, switch the power OFF by the normal
procedure.

Reset Procedure If the Android Screen Freezes

• If reset is performed when the Android screen is in operation, data stored in the Android screen
may be corrupted.
1.
Press the reset button on the left side of the control unit in order to reboot the control unit.

Maintenance Modes

The different service modes and their roles are as follows.
* For security reasons, the specific methods for switching between service modes are not given here.
Please check according to the usual procedure.
27