Ricoh PJ WX4241N 사용자 설명서 - 페이지 9
{카테고리_이름} Ricoh PJ WX4241N에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Ricoh PJ WX4241N 24 페이지.
Ricoh PJ WX4241N에 대해서도 마찬가지입니다: 사용자를 위한 참고 사항 (2 페이지)
• Power Source
Please be sure to connect the power cord to a power source as above.
Handling the Main Machine
This section explains safety precautions about handling the main machine.
• If the machine emits smoke or odours, or if it behaves unusually, you must turn off its power
immediately. After turning off the power, be sure to disconnect the power cord plug from the
wall outlet. Then contact your service representative and report the problem. Do not use the
machine. Doing so could result in fire or electric shock.
• If metal objects, or water or other fluids fall inside this machine, you must turn off its power
immediately. After turning off the power, be sure to disconnect the power cord plug from the
wall outlet. Then contact your service representative and report the problem. Do not use the
machine. Doing so could result in fire or electric shock.
• Do not touch this machine if a lightning strike occurs in the immediate vicinity. Doing so could
result in electric shock.
• The following explains the warning messages on the plastic bag used in this product's
packaging.
• Keep the polythene materials (bags, etc.) supplied with this machine away from babies
and small children at all times. Suffocation can result if polythene materials are brought into
contact with the mouth or nose.
• If the machine topples, or if a cover or other part gets broken, you must turn off its power
immediately. After turning off the power, be sure to disconnect the power cord plug from the
wall outlet. Then contact your service representative and report the problem. Do not use the
machine. Doing so could result in fire or electric shock.
• The machine may be very hot after it is turned off, especially the vents and the lower part of the
unit where the lamp is located. Avoid touching these areas. Doing so may result in burns.
• Do not place the machine on other equipment or vice versa. Doing so may cause heat buildup
inside the machine or cause the other equipment to malfunction.
Safety Precautions to Be Followed
7