Cisco 1000 ISR Series 설치 및 연결 - 페이지 4
{카테고리_이름} Cisco 1000 ISR Series에 대한 설치 및 연결을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 1000 ISR Series 27 페이지. This chapter describes how to install and connect cisco 1000 series integrated services router (isr) to lan and wan networks.
페이지 인쇄
Mount the Router
Figure 2: Bracket Installation for C1121-4Px, C1126-8PLTEP and C1128-8PLTEP
Mount the Router
Before mounting the router on to the rack, refer to the following safety warning statements:
Warning
To prevent airflow restriction, allow clearance around the ventilation openings to be at least: 1.75 in. (4.4
cm). Statement 1076.
Warning
• To prevent bodily injury when mounting or servicing this unit in a rack, you must take special precautions
• This unit should be mounted at the bottom of the rack if it is the only unit in the rack.
• When mounting this unit in a partially filled rack, load the rack from the bottom to the top with the
• If the rack is provided with stabilizing devices, install the stabilizers before mounting or servicing the
Install and Connect the Router
4
to ensure that the system remains stable. The following guidelines are provided to ensure your safety:
heaviest component at the bottom of the rack.
unit in the rack. Statement 1006.
Install and Connect the Router