Cisco 12016 사용 설명서 - 페이지 8
{카테고리_이름} Cisco 12016에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 12016 16 페이지. Blower module and air filter for cisco 12016, cisco 12416, and cisco 12816 router
Cisco 12016에 대해서도 마찬가지입니다: 포장 풀기 사용 설명서 (28 페이지), 데이터시트 (9 페이지), 교체 지침 매뉴얼 (32 페이지), 교체 지침 매뉴얼 (18 페이지)
페이지 인쇄
Using the Scissor-Jack Platform
Figure 5
Scissor-jack
Counter-clockwise
expands platform
Position the safety hand truck at one side of the router, slide the router and scissor-jack platform onto
Step 7
the safety hand truck, and secure the router to the hand truck with the locking safety strap.
Tilt the safety hand truck onto its outrigger wheels to move the chassis to a level, open space with a solid
Step 8
floor, where the chassis can be repackaged for shipping.
Moving a Router onto a Pallet
To reinstall the router and scissor-jack platform onto the shipping pallet, use
follow these steps:
Use the hand truck to move the chassis to a level, open space with a solid floor.
Step 1
Tilt the chassis upright so that it stands on the scissor-jack platform, then remove the hand truck.
Step 2
Use the bolts from the original shipping package to attach the eight hold-down brackets to the sides of
Step 3
the scissor-jack platform (two brackets on each side).
Note
Position the U-shaped pallet body behind the scissor-jack platform with the opening facing the back
Step 4
panel of the router.
Cisco 12016, Cisco 12416, and Cisco 12816 Router Scissor-Jack Instructions
8
Closing the Scissor-Jack Platform to Lower the Chassis
Front of chassis
screw
The hold-down brackets are not symmetrical: The bracket plate that fastens to the side of the
scissor-jack platform is narrower than the bracket plate that fastens to the top of the pallet, and
its bolt holes are smaller in diameter.
Chassis anchor
clip and bolt
(2 on each side)
Scissor-jack
platform
Clockwise
closes platform
Figure 6
as a reference and
78-15717-01