Epson EMP 7900 네트워크 매뉴얼 - 페이지 11

{카테고리_이름} Epson EMP 7900에 대한 네트워크 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson EMP 7900 43 페이지. Esc/vp21 command user's guide for business projectors
Epson EMP 7900에 대해서도 마찬가지입니다: 사양 (2 페이지), 사용자 설명서 (25 페이지), 사양 (4 페이지), 사용자 설명서 (25 페이지), 사용자 설명서 (28 페이지), 사용자 설명서 (28 페이지)

페이지 인쇄
Epson EMP 7900 네트워크 매뉴얼
Chapter 2
Setting Up Your System for Network Printing

Overview

This section describes the general procedure on how to set up the network
interface.
1. Check the network interface operation.
Check the functions and operations of the network interface, such as the
status lights. See "Network Interface Operation" on page 9 for details.
2. Install the necessary network components on your computers.
Make sure that the necessary network components (such as TCP/IP) are
installed on your computers, and network settings (such as the IP address,
subnet mask, etc.) are set.
3. Connect the network interface to the network.
Connect the network interface to the network. See "Connecting the
Network Interface to the Network" on page 16 for details.
4. Configure the network interface and install the printer driver.
See "Configuring the Network Interface" on page 17 for details.
5. If necessary, configure the network settings of the network interface using
EpsonNet Config.
Configure the network interface using EpsonNet Config. For Windows
users, see "About EpsonNet Config" on page 29. For Macintosh users, see
"About EpsonNet Config" on page 30.
Setting Up Your System for Network Printing
11