Epson EMP 7900 네트워크 매뉴얼 - 페이지 9

{카테고리_이름} Epson EMP 7900에 대한 네트워크 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson EMP 7900 43 페이지. Esc/vp21 command user's guide for business projectors
Epson EMP 7900에 대해서도 마찬가지입니다: 사양 (2 페이지), 사용자 설명서 (25 페이지), 사양 (4 페이지), 사용자 설명서 (25 페이지), 사용자 설명서 (28 페이지), 사용자 설명서 (28 페이지)

페이지 인쇄
Epson EMP 7900 네트워크 매뉴얼

Network Interface Operation

Status lights

The status lights provide you with important information on the operation of
the network interface.
The light on the left indicates whether the network interface is connected to a
10Base-T (green) or 100Base-TX (orange) network.
The light on the right flashes when data is being transmitted.
If the light on the left is solid green and the light on the right is off, the printer
is not connected to the network.

Network connector

The RJ-45 connector is used to connect an Ethernet cable to a network. You
can use an Ethernet cable for both 10Base-T and 100Base-TX.
Caution:
c
You must use a Category-5 or higher shielded twisted-pair cable to connect the
network interface to a network.
Indicates connection
type
RJ-45 connector
Flashes when data
is received
9
Introduction