ActronAir Serene 2 RC-02 운영 매뉴얼 - 페이지 11

{카테고리_이름} ActronAir Serene 2 RC-02에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ActronAir Serene 2 RC-02 16 페이지.

Operation Manual

06. How To Use Advanced Function

Setting vertical angle of airflow

While the unit is on, use the

1. Press the

2. Press it again to stop the automatic function.

NOTE

Continue pressing

until the direction you prefer is reached.

Setting horizontal angle of airflow

While the unit is on, use the

1. Press and hold the

and right automatically.

2. Press and hold it again to stop the automatic function

NOTES

When using COOL and DRY mode, do not set vertical louvre to the minimum angle for long periods of time. This can

cause water to condense on the louvre blade, which may drop on your floor or furnishings. See Fig. 1

When using COOL or HEAT mode, setting the vertical louvre to the minimum angle can reduce the performance of the

unit due to the restricted air flow.

Do not move the louvre by hand. This will cause the louvre to become out of sync. If this occurs, reset mains power

supply isolator of the air conditioning to restart the unit. This will reset the louvre.

During Pre-Heat function louver will be in a default position.

1. Press the LED button to activate or de-activate the display on the indoor unit.

2. Press and hold the LED button for more than 5 seconds until it beeps, release. Then press and hold again for 5

seconds then release after beeps.

3. After few seconds the room temperature shows.

4. To revert to previous display, repeat steps 2 and 3. To revert the change press LED button until set point shows

on the indoor unit.

button to set the direction (vertical angle) of airflow.

button to activate the louvre. The vertical louvre will swing up and down automatically.

the

button will adjust the vertical airflow angle in five different position. Keep pressing the button

button to set the direction (horizontal angle) of airflow.

button for more than 2 seconds to activate the louvre. The vertical louvre will swing left

Fig. 1

Operation Manual - Serene 2 Remote Controller

Document: 9590-4010 Ver. 1 200819

Remote Controller