ActronAir Serene 2 RC-02 Посібник з експлуатації - Сторінка 11
Переглянути онлайн або завантажити pdf Посібник з експлуатації для Пульт дистанційного керування ActronAir Serene 2 RC-02. ActronAir Serene 2 RC-02 16 сторінок.
Друкувати сторінку
Operation Manual
06. How To Use Advanced Function
06.01. Swing Function
Setting vertical angle of airflow
While the unit is on, use the
1. Press the
2. Press it again to stop the automatic function.
NOTE
Continue pressing
until the direction you prefer is reached.
Setting horizontal angle of airflow
While the unit is on, use the
1. Press and hold the
and right automatically.
2. Press and hold it again to stop the automatic function
NOTES
When using COOL and DRY mode, do not set vertical louvre to the minimum angle for long periods of time. This can
cause water to condense on the louvre blade, which may drop on your floor or furnishings. See Fig. 1
When using COOL or HEAT mode, setting the vertical louvre to the minimum angle can reduce the performance of the
unit due to the restricted air flow.
Do not move the louvre by hand. This will cause the louvre to become out of sync. If this occurs, reset mains power
supply isolator of the air conditioning to restart the unit. This will reset the louvre.
During Pre-Heat function louver will be in a default position.
06.02. LED Display
1. Press the LED button to activate or de-activate the display on the indoor unit.
2. Press and hold the LED button for more than 5 seconds until it beeps, release. Then press and hold again for 5
seconds then release after beeps.
3. After few seconds the room temperature shows.
4. To revert to previous display, repeat steps 2 and 3. To revert the change press LED button until set point shows
on the indoor unit.
button to set the direction (vertical angle) of airflow.
button to activate the louvre. The vertical louvre will swing up and down automatically.
the
button will adjust the vertical airflow angle in five different position. Keep pressing the button
button to set the direction (horizontal angle) of airflow.
button for more than 2 seconds to activate the louvre. The vertical louvre will swing left
Fig. 1
Operation Manual - Serene 2 Remote Controller
Document: 9590-4010 Ver. 1 200819
Remote Controller
11