Cisco 2600 Series 설치 매뉴얼 - 페이지 4

{카테고리_이름} Cisco 2600 Series에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 2600 Series 22 페이지. Configuring adsl wic to support pppoe clients
Cisco 2600 Series에 대해서도 마찬가지입니다: 설치 매뉴얼 (12 페이지), 릴리스 정보 (32 페이지), 구성 (15 페이지), 애플리케이션 노트 (41 페이지), 데이터시트 (6 페이지), 부록 (15 페이지), 개요 (13 페이지), 빠른 시작 매뉴얼 (2 페이지), 매뉴얼 (5 페이지)

페이지 인쇄
Cisco 2600 Series 설치 매뉴얼
Setting Up the Chassis
Figure 3-3
Place the router right-side up on a flat, smooth, secure surface.
Step 4
Do not place anything on top of the router that weighs more than 10 lb (4.5 kg). Excessive weight on
Caution
top could damage the chassis.

Mounting the Chassis in a Rack

This section describes the procedures for rack-mounting the chassis. Cisco 2600 series routers with a
chassis height of 1 rack-unit (1RU) ship with brackets for use with a 19-inch rack or, if specified in your
order, optional larger brackets for use with a 23- or 24-inch rack. Cisco 2600 series routers with a chassis
height of 2 rack-units (2RU) ship with brackets for use with a 19-inch rack. The brackets are shown in
Figure 3-4
Warning
To prevent bodily injury when mounting or servicing this unit in a rack, you must take special
precautions to ensure that the system remains stable. To see translations of the warnings that
appear in this publication, refer to the Regulatory Compliance and Safety Information document
that accompanied this device. The following guidelines are provided to ensure your safety:
•
•
Cisco 2600 Series Routers Hardware Installation Guide
3-4
Rubber Feet Location on Cisco 2691 Router
Chassis bottom
and
Figure
3-5.
If the rack contains only one unit, mount the unit at the bottom of the rack.
If the rack is partially filled, load the rack from the bottom to the top, with the heaviest component
at the bottom of the rack.
Chapter 3
Installing the Router
OL-2171-02